Drilling the upper wing drag wire holes

Tonight I unclamped all the the drag wire blocks after gluing and drilled all the drag, and anti-drag wire holes. It took awhile to get my jig just right requires a lot of clamping and re-clamping. It was all worth it in the end since all the holes were perfect and all the drag wires fit just right. I did have to adjust two ribs on each side no more than about 1/4 to 3/8″ one side or the other so that the drag wire didn’t hit the rib verticals. The good news is it was exactly the same on both sides.

Time spent 3.5 hours
Total time spent 135 hours

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: