Hand hold

After another almost 3 week stint down to florida for work I finally got to work on the plane this sunday. Good news is no more long travel down to florida, bad news double paychecks due to overtime and per diem saving are over boo. Any way I got the 1/2 X 3.5X12 peice of spruce in to work on the hand hold area. I started by marking the centerline of both sides of the hand hold. I then shimmed the middle up so it would sit on the centerline of the spar. I used a piece of wood to keep the centerline at the trailing edge. I cut the 1/2X3.5 spruce to an angle to fit the hand hold bow and then tapered them down to match the rear spar and hand hold bow. I cut the triangle braces for the trailing edge area and glued away. I still need to glue on some triangle brace as you can see and the blanking plate I’ll do that later. Anyway forward progress.

Time Spent Today 5 hours
Total time spent 211 hours

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

<span>%d</span> bloggers like this: