Tonight I worked on the right side I-struts again. The plan was to trim the 3/4″ tubes to length and cut the 35.5 deg angles at the tips of them. I wanted the I-strut bolts to line up perfectly so I lined them up and ran the drill to make a mark in the correct location. I then took them apart and drilled holes so effectively they are matched drilled to the lower and upper spars. I only got three of the 3/4 tubes cut and drilled. I was able to take a couple pictures tonight since I finally remembered the camera.
Time spent today 2.5 hours
Total time spent 408.5 hours