I have been busy in the basement the last couple of days. I finished welding the elevator control tube rod ends on all three control tubes so that’s 5 total. I cut out tail wheel steering horn and welded the attachment tube to it. After I did that I aligned the steering horn and drilled the holes for the two AN3 bolts. I cut and welded rudder pedal gussets that are to help support the brake pedal and give more surface area for my toes to rest. I built an engine support with caster so that I could separate the engine from the fuselage but keep it in a position to roll around as required. Once the engine was separated I rolled the fuselage over and finished all the bottom side welds. After all that was completed, I think I’m done welding… I called my powder coating shop and re-confirmed my powder coating date 2 weeks from now. I then quickly packed for my 9 day work trip.