Finishing and topcoating the forward belly pan and gear leg fairings

Again another two day roll up. I sanded the belly pan smooth and shot the blue onto it. While that was drying I sanded the gear leg fairings after the body putty dried I used the 80 grit to smooth the putty then followed it with 220 and then finally 320 to get it nice and smooth once that was compelete I could see that it successfully filled the pin holes. The next day I shot an other coat of primer on to them and once that was dry I was able to shoot the blue on to them and they came out great.

Time spent 5 hours
Total time spent 1537 hours

Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: